CNC Roll Grinder Machine Specification
| Standard Specification | MODLE | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| S | HS | M | L | H | |||||||
| ITEM | UNIT | S40 | HS40 / HS60 | M60 | L85 | L100 | H85 | H130 | H160 | H200 | |
| Working capacity | Max. swing over table | mm | Ø400 | Ø400 / Ø600 | Ø600 | Ø850 | Ø1000 | Ø850 | Ø1300 | Ø1600 | Ø2000 |
| Max. distance between c.c. | M | 1.5M,2M,3M,4M | 2M,3M,4M,5M,6M,7M,8M | 3M,4M,5M,6M | 3M,4M,5M,6M | 3M,4M,5M,6M,8M,9M,12M | 4M,5M,6M,7M,8M | 5M,6M,7M,8M,10M,12M | 6M,7M,8M,10M,12M | ||
| Max. weight of workpiece | kg | 1,500 | 1,500 | 4,000 | 6,000 | 15,000 | 15,000 | 30,000 | 40,000 | ||
| Max. O.D. ground | mm | Ø400 | Ø400 | Ø600 | Ø850 | Ø1000 | Ø850 | Ø1300 | Ø1600 | Ø2000 | |
| Rang of grinding dia. | mm | Ø5~Ø400 | Ø5~Ø400 | Ø15~Ø600 | Ø20~Ø850 | Ø20~Ø1000 | Ø50~Ø850 | Ø80~Ø1300 | Ø180~Ø1600 | Ø250~Ø2000 | |
| Max. dia of crown | mm | - | By program | - | By program | ||||||
| Wheelhead & Carriage(X axis) | Wheel size(O. D. × Width × Bore) | mm | Ø500 × Ø152.4 × 50 | Ø910 × Ø304.8 × 75 | Ø910 × Ø304.8 × 80 | ||||||
| Type of lubricating system | - | Hydrostatic & dynamic system | |||||||||
| Rotating speed of wheel | R.P.M. | 300~1800 | 300~1800 | 300~1000 | |||||||
| Max. cross feed rate | mm/min | 1000mm/min | 1000mm/min | 2000mm/min | 3000mm/min | ||||||
| Cross feed per pulse | mm/p | 0.001mm | |||||||||
| Table(Z axis) | Travel of table or head (Z axis) | mm | Center Distance + 8" | ||||||||
| Travel speed of table | mm/min | 25~3000mm/min | 25~6000mm/min | ||||||||
| Type of lubricating systekm | - | Hydrostatic & dynamic system | |||||||||
| MODLE | S | M | HS | L | H | ||||||
| S40 | HS40 / HS60 | M60 | L85 | L100 | H85 | H130 | H160 | H200 | |||
| Support | Roll neck diameter range | mm | - | Ø40~Ø140 | - | 100~400 | 90~400(350~600 option) | 90~400(350~700 option) | |||
| Workhead&Tailstock | Rotation speed of work head | R.P.M. | 10~100 | 8~80 | 6~60 | 8~80 | 6~50 | 3~30 | |||
| Size of center | - | MT#5 | MT#6 | PT#100 | |||||||
| Moving speed of tailstock | mm/min | Manual | 3000 | 2000 | |||||||
| Stroke of quill | mm | 50mm | 80mm | 10mm | 200mm | ||||||
| MODLE | S | HS | M | L | H | ||||||
| S40 | HS40 / HS60 | M60 | L85 | L100 | H85 | H130 | H160 | H200 | |||
| Power rating | Grind wheel motor | HP | 10HP x 6P | 15HP x 6P | 20HP x 6P | 30HP x 6P | 40HP | 60HP(40HP × 6P) | 75HP(60HP × 6P) | ||
| Work head motor | HP | 3HP × 6P | 7.5HP x 6P | 10HP x 6P | 30HP | 30HP × 6P | 40HP × 6P | 30HP × 6P | |||
| Table traverse motor(Z axis) | HP | 12NM | 22NM | 22NM | |||||||
| Tailstock move motor | HP | - | 1HPX6P | ||||||||
| Cross feed motor(X axis) | HP | 8NM | 12NM | ||||||||
| Lubricating system | HP | 2HP | |||||||||
| Coolant system | L | 280Liter | 360Liter, 420Liter | 420Liter | 2000Liter × 2HP | ||||||
All Specifications are subject to change without notice.
